The New MallinCam TeleCam Observing System
The new MallinCam TeleCam Observing System represent a new technology never
achieved before until now. It allows a observer to insert the camera into a telescope and view the live image via a DVF. Direct connection is done through a supplied HDMI cable. Result is a live high resolution observation of solar system and many deep sky objects.
The MallinCam TeleCam comes complete with a 1.25" C mount adapter, a 0.5X focal reducer for increased sensitivity and wider field of view on deep sky objects, it also comes equipped with 12 volts cigarette lighter plug and a 120 volts ac adapter. HDMI cable, USB cable for direct computer observation is also included. The camera is controlled with a supplied mouse to access the extensive camera menu live on the DVF.
For a limited time the MallinCam TeleCam Observation System comes with a tripod to mount the DVF up to 50" in height. The DVF comes with a adjustable large lens making it easy for anyone to view though the system and can be focused as well to each individual taste. The large lens also flips up to allow full view from a 3.5" monitor.
The DVF has many features to allow anyone whishing to explore the night sky. The camera has a extensive menu of adjustments accessible via the supplied mouse. No computer needed. The fully contained camera has built-in computer, memories, and even has a SD card for a observer to take pictures or video of their favorite object. Never before such a advanced device has been offered for astronomical observers.
Here's a sample of features included in this package
DVF (Digital View Finder)
1. Wide view angle, HD, bright, colorful display
2. HDMI input and loop-through output
3. Special Features:
* Peaking Focus Assist (Red highlight over parts of the monochrome image in focus)
* Check Field (Red, Green, Blue, Mono)
* Camera Mode
* Pixel to Pixel
* Center Marker
* Safe Marker (80%, 85%, 90%, 93%, 96%, 2.35:1)
* Image Flip (Horizontal, Vertical, Hor&Ver)
* Image Freeze
* Zoom All
* U/D & L/R Zoom
* Custom Color Temperature
Using the DVF Flip-Up, you can operate the camera HDMI port, with the correct form factor for video with the camera "in-line" to the rod systerm and your eye in the Z-Finder offset. In addition to enhance the stability for better resolution, the DVF Flip-Up allows for a comfortable eye position that enables low-mode viewing. The DVF high resolution 3.5 Inch HD display provides excellent picture quality and color reproduction for exact video monitoring.
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment
Pixel to Pixel
Enable the observer to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail.
Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%,2.35:1)
The Horizontal, Vertical and Hor&Ver of the image around flip is possible with easy access from the DVF menu.
Input Voltage DC6~14V
Power Consumption =3W
Working Temperature -30°C~50°C
Install Way 1/4"-20 Thread Socket
Unit Size 111.2L×88.3H×117.8D mm
Unit Weight 400g
MallinCam HD-10 Camera
Sensor: CMOS 2.1 megapixel High Performance, Back Illuminated, High Definition Sony CMOS sensor
Sensor Size: 1/2.8"
Image Processor: Built-in ISP
Dynamic Resolution: 1920x1080
Static Resolution 3264x1836
Frame Rate: 30fps@USB2.0 30fps@HDMI
Capture: SD card(16G) (Included)
Video Recording: 30fps@SD 30fps@PC
Exposure Mode: Auto/Manual
Exposure Time: 0.001s-10s
White Balance: Auto/Manual
Setting: White Balance,Gain,Noise Reduction,Gamma,Exposure Time,WDR,etc
Output Port: USB2.0,SD,HDMI
Compatible OS: Window XP and above
Optical Port: Standard C-Mount
Included in the kit:
1- MallinCam HD-10 HDMI Video Camera
1- MallinCam DVF
1- 0.5X Focal Reducer
1- 12 volts dc adapter
1- 120 volts ac adapter
1- Multi port DC cable
1- HDMI cable
1- 16G SD card
1- USB cable
For a Limited time, a 50 inch tripod is included.
Price 1199.99 US funds.
Available Now, In stock
Click on each images below.