MISCELLANEOUS ACCESSORIES
The table below summarizes our range of available miscellaneous accessories. Click the link in the table to jump to more information about each accessory.
The table below summarizes our range of available miscellaneous accessories. Click the link in the table to jump to more information about each accessory.
| Item # | Accessory | MSRP | Details |
| MA-01 | Ball cap, grey | $19.95 USD | info |
| MA-02 | HDMI upscaler | $99.99 USD | info |
| MA-03 | Digital View Finder | $299.99 USD | info |
| MA-04 | Digital View Finder w/HDMI upscaler | $399.99* USD | info |
| MA-05 | 8" high resolution LCD monitor | $199.99* USD | info |
| MA-06 | 12" high resolution LCD monitor | $329.99 USD | info |
| MA-07 | 15" high resolution LCD monitor | $389.99 USD | info |
| MA-08 | LensPen SensorKlear II | $19.99 USD | info |
| MA-09 | LensPen miniPro | $14.99 USD | info |
| MA-10 | 2" focuser DOB adapter | $89.99 USD | info |
| MA-11 | 2" to C-mount camera adapter | $89.99 USD | info |
| MA-12 | HDX2-F heatsink + fan kit | $149.99 USD | info |
| MA-13 | Replacement fan kit | $69.99 USD | info |
| MA-14 | Remote wired keypad | $59.99 USD | info |
| MA-15 | MCV-1-E video frame grabber with VDVE | $149.99 USD | info |
| MA-16 | MCV-1 video frame grabber | $79.99 USD | info |
| MA-17 | HDX2 heat dissipater | $79.99 USD | info |
| MA-18 | MCSV-25 S-video cable | $49.99 USD | info |
| MA-19 | MCSV-50 S-video cable | $69.99 USD | info |
| MA-20 | MCSV-100 S-video cable | $99.95 USD | info |
(MA-01) Ball Cap, Grey
COOL HAT!! WEAR THE BRAND THAT STARTED IT ALL
COOL HAT!! WEAR THE BRAND THAT STARTED IT ALL
(MA-02) HDMI Upscaler
- Up-Scales MallinCam Composite Video or S-Video to 720p/1080p (selectable) HDMI.
- Motion Compensated 3D Wavelet Video Coding Technology is applied to make the converted picture rich in color and more vivid.
- Input video systems - NTSC and PAL is automatically detected and adjusted.
- Change MallinCam Video CCD Cameras Composite or S-Video to HDMI
- Automatically convert signals from PAL or NTSC analog to NTSC Digital
|
|
Available Now! download spec page |
|
(MA-03) Digital View Finder (DVF)
NEW !!! The New MallinCam DVF is a special Digital View Finder compatible with all astronomical video ccd cameras. It includes a 3.5 inch 800X480 pixels LCD LED High Resolution screen that allows you to operate a MallinCam Video CCD camera just like an eyepiece in full color. The New MALLINCAM DVF will enhance the stability, give you better resolution, and allow you to get your eye where it most comfortably needs to be. The additional HDMI loop output also enables a third field monitor or projector. Ideal for solar observing through a Solar Scope in the day time. The main viewfinder can be lifted allowing the 3.5" high resolution monitor to be observed directly. Ideal for star parties where monitor glow can bother other observers. Experience a new way to observe through new eyepiece technology only from MallinCam. |
|
|
Can be tilted for comfort while observing. The Viewer assembly can be hinged up out of the way and held with built-in magnetic holders, allowing a direct view of the 3.5" high resolution monitor. Complete view finder assembly can be removed allowing monitor use only.
(Camera in the images is not included and is for example only.) Note that the DVF alone accepts only a standard HDMI input. To connect to a camera with S-video or Composite video output you will require the HDMI upscaler as well. See the next item below for more information on this bundle.
Available Now! In stock. |
(MA-04) Digital View Finder w/ HDMI Upscaler
Since we know many of our customers would like to use the high resolution DVF with their MallinCam astro-video cameras with analog video output, we have assembled this bundle just for them. You get the fabulous DVF as described above, plus you get the MallinCam HDMI Upscaler. Convert the S-video or Composite video output from your camera into crisp rich HD.
MSRP = $499.99 USD, available for a limited time offer of $399.99 USD.
LCD Panel Bright/Dark Dot Warranty & Regulation
Since LCD panel is made up of millions of micro electronic pixels, if one
pixel no longer functions normally, it will become a bright or dark dot. By
ISO 13406-2 standards, MALLINCAM conforms to the acceptance level between 3 to 5
defective bright/dark pixels. In order to deliver ultimate vision experience
to MALLINCAM customers, if your panel is less than or equal to the above number of
dots, then, it is considered as an acceptable LCD monitor."
Since we know many of our customers would like to use the high resolution DVF with their MallinCam astro-video cameras with analog video output, we have assembled this bundle just for them. You get the fabulous DVF as described above, plus you get the MallinCam HDMI Upscaler. Convert the S-video or Composite video output from your camera into crisp rich HD.
MSRP = $499.99 USD, available for a limited time offer of $399.99 USD.
LCD Panel Bright/Dark Dot Warranty & Regulation
Since LCD panel is made up of millions of micro electronic pixels, if one
pixel no longer functions normally, it will become a bright or dark dot. By
ISO 13406-2 standards, MALLINCAM conforms to the acceptance level between 3 to 5
defective bright/dark pixels. In order to deliver ultimate vision experience
to MALLINCAM customers, if your panel is less than or equal to the above number of
dots, then, it is considered as an acceptable LCD monitor."
|
(MA-05) 8" LCD High Resolution Monitor
The New MallinCam 8" High Resolution Monitor is now here! It features a lightweight design, ready to mount on top of your MallinCam Video CCD camera. The New 8" High Res monitor comes with a removable light weight Sun shade. The New MallinCam 8" monitor includes everything you need:
$199.99 USD. MONITOR IS CURRENTLY SOLD OUT LCD Panel Bright/Dark Dot Warranty & Regulation Since LCD panel is made up of millions of micro electronic pixels, if one pixel no longer functions normally, it will become a bright or dark dot. By ISO 13406-2 standards, MALLINCAM conforms to the acceptance level between 3 to 5 defective bright/dark pixels. In order to deliver ultimate vision experience to MALLINCAM customer, if your panel is less than or equal to the above number of dots, then, it is considered as an acceptable LCD monitor." |
|
(MA-06) 12" High Resolution LCD Monitor
(MA-07) 15" High Resolution LCD Monitor THE 12 AND 15 INCH MONITORS ARE SOLD OUT FOR 2018 NEW!! The MallinCam High resolution monitor allows the highest resolution possible from any astronomical video ccd camera source. These monitors rival the best CRT type on the market today. These scientific industrial monitors feature anti-glare screens, and are properly fitted for 4:3 ratio to accommodate MallinCam Video CCD cameras. Available in 12 inch and 15 inch size. The 12" size is ideal for in field use. The 15" model is ideal for home or observatory use. Powered by 12 volts dc system, a 110 volts ac adapter is included with each monitor. A wide variety of inputs allow connectivity from: SVBS (composite), S-VIDEO, HDMI, and a input for computer display. Bypass output is through 3 BNC 75 Ohms output to further drive any other devices such as a DVR or link through to a capture device. |
|
The monitor external cabinets are made of 100% steel for durability and long life. The LED monitor offers crisp vivid colors and black and white images rivaling broadcast type monitors. Fully vented, and shielded to keep noise to a minimum in the field or at home in an observatory.
All inputs are selectable through a comprehensive menu via a remote keypad or directly through push buttons on top of the monitor. The included stand can be adjusted to the observer position by two hinges allowing height and angle to be selected. The monitor features selectable a noise reduction feature, Contrast, Brightness, Sharpness, Hue, Saturation, ZOOM, freeze, Picture in Picture for scientific comparison along with a whole slew of advanced features. Get the most from you MallinCam Video CCD camera by displaying your live image on one of these great monitors!
LCD Panel Bright/Dark Dot Warranty & Regulation
Since LCD panel is made up of millions of micro electronic pixels, if one
pixel no longer functions normally, it will become a bright or dark dot. By
ISO 13406-2 standards, MALLINCAM conforms to the acceptance level between 3 to 5
defective bright/dark pixels. In order to deliver ultimate vision experience
to MALLINCAM customer, if your panel is less than or equal to the above number of
dots, then, it is considered as an acceptable LCD monitor."
All inputs are selectable through a comprehensive menu via a remote keypad or directly through push buttons on top of the monitor. The included stand can be adjusted to the observer position by two hinges allowing height and angle to be selected. The monitor features selectable a noise reduction feature, Contrast, Brightness, Sharpness, Hue, Saturation, ZOOM, freeze, Picture in Picture for scientific comparison along with a whole slew of advanced features. Get the most from you MallinCam Video CCD camera by displaying your live image on one of these great monitors!
LCD Panel Bright/Dark Dot Warranty & Regulation
Since LCD panel is made up of millions of micro electronic pixels, if one
pixel no longer functions normally, it will become a bright or dark dot. By
ISO 13406-2 standards, MALLINCAM conforms to the acceptance level between 3 to 5
defective bright/dark pixels. In order to deliver ultimate vision experience
to MALLINCAM customer, if your panel is less than or equal to the above number of
dots, then, it is considered as an acceptable LCD monitor."
(MA-08) LensPen SensorKlear II
Clean CCD and CMOS sensors like the pros! SensorKlear II combines the unique LensPen cleaning tip with an articulating head for effective sensor cleaning results every time!
Clean CCD and CMOS sensors like the pros! SensorKlear II combines the unique LensPen cleaning tip with an articulating head for effective sensor cleaning results every time!
(MA-09) LensPen miniPro
The unique LensPen miniPro features a fully retractable ultra fine brush and a flexible chamois tip. It uses a proprietary carbon based cleaning compound that won't spill or dry out. There's nothing else like it on the market and the LensPen miniPro has won many awards for superior product design and usability.
Ideal for cleaning All MallinCam focal reducers including MFR-5, MFR-3, 0.49X, 2" focal reducer, MallinCam 2.5X Apochromatic Barlow and more.
The unique LensPen miniPro features a fully retractable ultra fine brush and a flexible chamois tip. It uses a proprietary carbon based cleaning compound that won't spill or dry out. There's nothing else like it on the market and the LensPen miniPro has won many awards for superior product design and usability.
Ideal for cleaning All MallinCam focal reducers including MFR-5, MFR-3, 0.49X, 2" focal reducer, MallinCam 2.5X Apochromatic Barlow and more.
(MA-10) 2" Focuser DOB Adapter
BACK BY POPULAR DEMAND ! ! The New 2" Focuser Dob Adapter is back!! Slips over any standard camera 1.25" adapter, MFR-5, MFR-3, etc. and is held in place with a set screw. Allows the camera to be inserted farther into the focuser than if you had to use a traditional 1.25"-to-2" adapter. This adapter also act as a Heat Dissipator. Allen wrench and Allen screw included. Gain back focus on all Newtonian design to reach focus. Can also be used on all 2" focusers of SCT, RC, Refractors. 100% designed and made in Canada by MallinCam.
-- Camera in picture is for illustration and is not included --
BACK BY POPULAR DEMAND ! ! The New 2" Focuser Dob Adapter is back!! Slips over any standard camera 1.25" adapter, MFR-5, MFR-3, etc. and is held in place with a set screw. Allows the camera to be inserted farther into the focuser than if you had to use a traditional 1.25"-to-2" adapter. This adapter also act as a Heat Dissipator. Allen wrench and Allen screw included. Gain back focus on all Newtonian design to reach focus. Can also be used on all 2" focusers of SCT, RC, Refractors. 100% designed and made in Canada by MallinCam.
-- Camera in picture is for illustration and is not included --
|
(MA-11) 2" to C-mount Camera Adapter
Pictured is the new 2 inch video ccd adapter. It fits all MallinCam C mount video ccd cameras. It has been totally redesigned to accept all 2" filters, MallinCam 2 inch focal reducer, and 1.25" filters as well as 0.49X MallinCam 1.25" focal reducer or any focal reducers that attach using filter type threads. Not made to accept male C type threads. 100% Designed and made in Canada by MallinCam. |
|
(MA-12) HDX2-F Heatsink + Fan Kit
Pictured is the new HDX2-F kit. Fits all MallinCam models except Micro, SSI, and Universe. Ideal for hot environments to help keep the ccd sensor and Peltier cooler stable. The 4 watts fans were custom made to our specification with extra high flow, vibration free performance. 100% design and made in Canada by MallinCam.
Pictured is the new HDX2-F kit. Fits all MallinCam models except Micro, SSI, and Universe. Ideal for hot environments to help keep the ccd sensor and Peltier cooler stable. The 4 watts fans were custom made to our specification with extra high flow, vibration free performance. 100% design and made in Canada by MallinCam.
(MA-13) Replacement Fan Kit
Pictured above is the new fan kit. Fits all MallinCam HDX2. Ideal for hot environment to keep the ccd sensor and Peltier cooler
stable.
Pictured above is the new fan kit. Fits all MallinCam HDX2. Ideal for hot environment to keep the ccd sensor and Peltier cooler
stable.
(MA-14) NEW! Remote Wired Thumb-pad - 59.99 US
The Remote Wired Thumb-pad is designed for use with the MallinCam Jr PRO, MallinCam Xtreme and MallinCam Xterminator, providing Menu Control with 2 meters Cord. Plugs Directly Behind the Camera through the AUX Port. Designed and made in Canada by MallinCam.
Sold Out.
The Remote Wired Thumb-pad is designed for use with the MallinCam Jr PRO, MallinCam Xtreme and MallinCam Xterminator, providing Menu Control with 2 meters Cord. Plugs Directly Behind the Camera through the AUX Port. Designed and made in Canada by MallinCam.
Sold Out.
(MA-15) MCV-1-E Video Frame Grabber with VDVE
NEW!! MallinCam Frame Grabber HD with VDVE (Variable Digital Video Enhancer). The New MCV-1-E HD permits the video output of any MallinCam Video CCD Camera to be displayed and captured on any computer with USB. View live, record or capture images with AMCAP or any other imaging software. Fully compatible with Xtreme Control Software, VSS software as well. At last, a frame grabber designed for astronomical video work. Accepts: Composite, S-VIDEO, and Component inputs. Includes the new VDVE (Variable Digital Video Enhancer) electronics designed by MallinCam in Canada. WIN XP, WIN XP PRO, WIN VISTA, WIN 7, WiN 8 Compatible. 32 or 64 bits.
* NOTE*: The white cover shown is not a push button. Do not push this white round cover as the main video processor sit just under it.
NEW!! MallinCam Frame Grabber HD with VDVE (Variable Digital Video Enhancer). The New MCV-1-E HD permits the video output of any MallinCam Video CCD Camera to be displayed and captured on any computer with USB. View live, record or capture images with AMCAP or any other imaging software. Fully compatible with Xtreme Control Software, VSS software as well. At last, a frame grabber designed for astronomical video work. Accepts: Composite, S-VIDEO, and Component inputs. Includes the new VDVE (Variable Digital Video Enhancer) electronics designed by MallinCam in Canada. WIN XP, WIN XP PRO, WIN VISTA, WIN 7, WiN 8 Compatible. 32 or 64 bits.
* NOTE*: The white cover shown is not a push button. Do not push this white round cover as the main video processor sit just under it.
(MA-16) MCV-1 Video Frame Grabber
The MCV-1 HD permits the video output of any MallinCam Video CCD Camera to be displayed and captured on any computer with USB. View live, record or capture images with AMCAP or any other imaging software. Fully compatible with Xtreme Control Software, VSS software as well. At last, a frame grabber designed for astronomical video work. Accepts: Composite, S-VIDEO, and Component inputs. Expandable for future electronic add on. Electronics designed by MallinCam in Canada. WIN XP, WIN XP PRO, WIN VISTA, WIN 7, WIN 8 Compatible. 32 or 64 bits.
* NOTE*: The white cover shown is not a push button. Do not push this white round cover as the main video proccessor sit just under it.
The MCV-1 HD permits the video output of any MallinCam Video CCD Camera to be displayed and captured on any computer with USB. View live, record or capture images with AMCAP or any other imaging software. Fully compatible with Xtreme Control Software, VSS software as well. At last, a frame grabber designed for astronomical video work. Accepts: Composite, S-VIDEO, and Component inputs. Expandable for future electronic add on. Electronics designed by MallinCam in Canada. WIN XP, WIN XP PRO, WIN VISTA, WIN 7, WIN 8 Compatible. 32 or 64 bits.
* NOTE*: The white cover shown is not a push button. Do not push this white round cover as the main video proccessor sit just under it.
(MA-17) HDX2 Heat Dissipater
The newly designed dual sided heat dissipator offers 50% more cooling efficiency. "Heat Wave" holes allow cooling of the outer casing as well as dissipating the head conducted away from the CCD. Fits on all of the MallinCam Video CCD cameras except the Micro, SSI, and Universe models. Each side has four pre-threaded holds to accept the 2" fan kit as an option. 100% designed and made in Canada by MallinCam with the highest quality aircraft aluminum and anodized for durability.
The newly designed dual sided heat dissipator offers 50% more cooling efficiency. "Heat Wave" holes allow cooling of the outer casing as well as dissipating the head conducted away from the CCD. Fits on all of the MallinCam Video CCD cameras except the Micro, SSI, and Universe models. Each side has four pre-threaded holds to accept the 2" fan kit as an option. 100% designed and made in Canada by MallinCam with the highest quality aircraft aluminum and anodized for durability.
(MA-18) MCSV-25 S-video cable
(MA-19) MCSV-50 S-video cable
(MA-20) MCSV-100 S-video cable
MallinCam Pro grade S-Video cables are the finest obtainable with the lowest signal loss. Available in lengths of 25 feet, 50 feet, and 100 feet. All connectors are gold plated.
(MA-19) MCSV-50 S-video cable
(MA-20) MCSV-100 S-video cable
MallinCam Pro grade S-Video cables are the finest obtainable with the lowest signal loss. Available in lengths of 25 feet, 50 feet, and 100 feet. All connectors are gold plated.
