MallinCam DS8300CTEC... A Camera for Everyone.
Introducing the new MallinCam DS8300cTEC, 8.3 MP - designed from the ground up to accommodate the most demanding astronomical video and imaging applications for beginners to advanced alike. Since most CMOS sensors cannot be directly cooled via a cold finger without causing damage and delamination with time which will ultimately shorten their life, a new cooling system had to be developed. MallinCam developed a unique cooling system that provides no direct physical contact between the Peltier cooler and the sensor. Instead, the Peltier cooler creates a convection system “refrigerator-like” environment that cools the sensor without actually contacting it. This cooling system is unique to MallinCam and not found on other astronomical imaging cameras.
Since the IMX585AAQJ1 class 1 CMOS sensor of the MallinCam DS8300cTEC is cooled via convection, thermal shock to it and its associated circuitry is reduced. CMOS sensors have other components mounted on the same wafer with the imaging section which do not requires or can be adversely affected by cooling. This includes the digital logic circuitry (interface, timing, processing, output amplifiers, pad rings and associated oscillators), clocks and timing controls, analog signal processing, analog-to-digital converter (which when under cooling from direct cold finger and Peltier results in instability). These parts of the CMOS sensor do not need to be direct cooled from a cold finger application.
MallinCam has successfully design a working alternative - a cooling chamber called refrigeration cooling - which subjects the CMOS sensor to cooling inside a triple sealed vacuumed sensor chamber controlled with a heating element mounted around the internal optical window to control and avoid dew formation on the optical window and surroundings. A vacuumed sealed chamber is used to eliminate the use of desiccant material and keep dew free environment permanently.
The result of this new technology, the SkyRaider DS8300cTEC, will not require a dark frame for live application in most cases. It is built to laboratory specification, where CNC machining is used throughout to provide the rigid tolerances needed to provide precise component matching. The chamber has six stainless steel screws securing the chamber cover to avoid possible air leaks into the chamber.
The internal electronics use Grade 1 components with tolerance of 0.5%, a military and aerospace standard. The camera contains DDR3 internal memory to insure the smooth flow of data to the computer. The DS8300cTEC also has a built-in USB2 hub that can support a guider or a USB type focuser.
Each camera is subjected to a 24-hour burn-in prior to being ready for shipment to insuring proper operation. It is these details that set MallinCam apart from everyone else.
KEY FEATURES-
* 8.3 MP Sensor
* Free Software, Free updates
* Convection Cooling
* Refrigeration Chamber
* Vacuumed Sealed Chamber
* Linear Cooling
* Built-in Heater for Optical Window Dew Removal and Chamber Temperature Control
* Built-In USB2 hub for Guider, Focuser, Filter Wheel etc.
* Four Blue LED Status Indicators ( power, system, cooler, fan)
* High velocity Ultra Quiet Fan With Dual Air Output
* High Grade Carrying Case
* 4Gb DDR3 Internal Memory for smooth operation
* Sony IMX585AAQJ1, 8.3MP Commercialized Version (no amp glow), Class 1 Hand Picked CMOS Sensor (Scientific Grade)
* Sony Literature, Click Here
* Pixel Size: 2.9 μm (H) × 2.9 μm (V)
* Spectral Range: 350nm to 1100nm.
* HCG and LCG Mode (High Conversion Gain, Low Conversion Gain Selectable)
* A high S/N ratio
* No Amp Glow
* Digital Binning Mode: 1 x 1, 2 x 2, 3 x 3, 4 x 4, 5x5, 6x6, 7x7, 8x8 All in Color
* Image Format, FITS, JPEG, BMP, PNG
* Full Video Mode: AVI, SER
* Vacuumed Sealed Optical Window
* T mount
* 1.25" Optical Adapter Included
* USB3 Operation for data and camera control
* Precision All Aluminum Construction and Stainless Steel hardware
* 10.0 cm X 8.00 cm (3.93 Inches X 3.14 inches)
* 534 Grams / 1.17 Pounds
* High Speed USB 3.1,
* 5 volts operation @900 ma.
* 12 volts DC Cooling via supplied A/C power supply
Includes, 5 meter (15 feet) USB 3.0 Cable, T mount to 1.25" adapter, 12 volts dc, AC power supply, Software
High Grade Carrying Case, MallinCam Software MallinCamSKY
599.99 USD. SOLD OUT. IN PRODUCTION
Presenting the Hydrophobic Aerogel insulation option, now accessible at an additional cost of $295.00 US funds at time of order
